As an Amazon Associate I earn from qualifying purchases.1. TECNOIOT
5pcs TEMT6000 Light Sensor TEMT6000 Sensitivity Ambient Light Simulate Intensity
TECNOIOT - Design compact although the device is sensitive to ambient light, but it inhibits infrared IR spectra, which can provide a similar higher visible spectrum response of the "eye". Temt600 temt6000 sensor maximum sensitivity of 570 nm, it has a plus or minus 60 ° wide half Angle of sensitivity.
Fast delivery fast and high quality delivery of Spain buying in TECNOIOT. Resolution max. Sensitivity: 570nm; wide sensitivity angle: +/- 60degree; Adapted to human eye responsivity.
2. SparkFun
VEML6030 Qwiic, SparkFun Ambient Light Sensor
SparkFun - Low stand by current consumption: typically 05uA. Configurable i2C address Default: 0x48. Removable pull-up resistors and power LED. Easy to use thanks to the Qwiic system, no soldering is required to connect it to the rest of your system.
Arduino library that gives full access to all features and includes example code demonstrating all its abilities available.
| Brand | SparkFun |
| Manufacturer | Sparkfun |
| Height | 1 cm (0.39 Inches) |
| Length | 5 cm (1.97 Inches) |
| Weight | 0 kg (0 Pounds) |
| Width | 5 cm (1.97 Inches) |
| Part Number | SEN-15436 |
3. TECNOIOT
TECNOIOT 2pcs Temt6000 Temt light sensor Temt 6000 sensitivity ambient light a Simulate intensity
TECNOIOT - Fast delivery fast and high quality delivery of Spain buying in TECNOIOT. Resolution max. Sensitivity: 570nm; wide sensitivity angle: +/- 60degree; Adapted to human eye responsivity. Design compact although the device is sensitive to ambient light, but it inhibits infrared IR spectra, which can provide a similar higher visible spectrum response of the "eye".
Temt600 temt6000 sensor maximum sensitivity of 570 nm, it has a plus or minus 60 ° wide half Angle of sensitivity.
4. TECNOULAB
TECNOULAB 5pcs Temt6000 Shop Light Sensor Temt6000 Ambient Light Sensitivity to Simulate Intensity
TECNOULAB - Resolution max. Temt600temt6000 sensor maximum sensitivity of 570nm, has a sensitivity angle of plus or minus 60 degrees wide. Fast deliveryfast delivery and high quality from Spain by buying on TECNOULAB.
Sensitivity: 570nm; sensitivity wide angle: +/- 60 degrees; Adapted to the reactivity of the human eye. Compact designalthough the device is sensitive to ambient light, but it inhibits infrared IR spectra, which can provide a higher "eye"-like visible spectrum response.
5. TechZone
TechZone Earpiece Ear Speaker Flex with Proximity Ambient Light Sensor for Apple iPhone X
TechZone - Part number : 821-01591-A. Compatibility : apple iphone x A1865, A1901 & A1902. Note to customer *** replacing this assembly will not restore Face ID functions and Face ID will not work after changing this part.
This solves common Defective Ear Speaker and some sensor functions. This is the perfect replacement for Apple iPhone X Ear Speaker Flex Cable Proximity Ambient Light Sensor Flex.
6. Waveshare
Waveshare 2-DOF Pan-Tilt HAT for Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+ Onboard PCA9685 PWM Chip TSL25911FN 16-bit Ambient Light Sensor Make Pi Camera Move and Sense Light Intensity via I2C
Waveshare - Onboard tsl25911fn light-to-digital converter, with embedded ADC, provides a value that approximates the human eye response to assist the module.
Specific acrylic board to fix raspberry pi camera, make it easy to install. Assembly guide: www. Waveshare. Com/img/devkit/accboard/Pan-Tilt-HAT/Pan-Tilt-HAT-assemble. Jpg. Raspberry pi connectivity, compatible with raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+ I2C interface, only 2 pins are required for moving and light intensity sensing.
Onboard pca9685 chip, provides 12-bit resolution PWM signal for moving control Onboard voltage level translator, compatible with 3. 3v/5v operating voltage.
| Brand | Waveshare |
| Manufacturer | Waveshare |
| Weight | 0.11 kg (0.24 Pounds) |
| Part Number | Pan-Tilt HAT |
| Model | Pan-Tilt HAT |
7. ASHATA
Ambient Light Sensor Module I2C Bus Interface Light Sensor Module for measuring ambient light
ASHATA - To use this module, you need to solder the supplied 5-pin connector according to the purpose. According to the type of microcontroller used, this module needs to install for CircuitPython library.
The sensor is designed for use with for Raspberry Pi type microcontrollers, or compatible via I2C bus. Light measuring sensor board have stable structure, excellent performance and long service life. This is a veml7700 sensor-based module for measuring ambient light, very practical.
| Brand | ASHATA |
| Manufacturer | ASHATA |
| Height | 1 cm (0.39 Inches) |
| Length | 1 cm (0.39 Inches) |
| Weight | 0 kg (0 Pounds) |
| Width | 1 cm (0.39 Inches) |
| Part Number | ASHATAwavyo5smen363 |
8. Annadue
Ambient Light Sensor Module with stable structure Light Measuring Board for Raspberry Pi VEML7700
Annadue - To use this module, you need to solder the supplied 5-pin connector according to the purpose. Light measuring sensor board have stable structure, excellent performance and long service life. This is a veml7700 sensor-based module for measuring ambient light, very practical.
According to the type of microcontroller used, this module needs to install for CircuitPython library. The sensor is designed for use with for Raspberry Pi type microcontrollers, or compatible via I2C bus.
9. Waveshare
Waveshare TSL25911 High Sensitivity Digital Ambient Light Sensor Wide Dynamic Range I2C Interface
Waveshare - Provides interrupt output with programmable upper and lower thresholds. High sensitivity up to 188uLux, wide dynamic range up to 600M:1. Embedded infrared-responding photodiode, allows precise measuring even on strong infrared noise environment.
Embedded adc, direct light intensity signal output to I2C interface, less noise jamming. Adopts tsl25911fn, measures infrared plus visible light wider range than TSL2561. Onboard voltage translator, compatible with 3. 3v/5v operating voltage.
| Brand | Waveshare |
| Manufacturer | Waveshare |
| Weight | 0.03 kg (0.08 Pounds) |
| Part Number | TSL25911 Light Sensor |
| Model | TSL25911 Light Sensor |
10. BooiParts
VEML7700 Ambient Light Sensor Module 120k Lux Light measuring Sensor Board 3.3V 5V I2C IIC Interface for Arduino Raspberry Pi
BooiParts - Veml7700 ambient light sensor module 120k lux light measuring Sensor Board 3. 3v 5v i2c iic interface for Arduino Raspberry Pi.
TECNOIOT - Design compact although the device is sensitive to ambient light, but it inhibits infrared IR spectra, which can provide a similar higher visible spectrum response of the "eye". Temt600 temt6000 sensor maximum sensitivity of 570 nm, it has a plus or minus 60 ° wide half Angle of sensitivity. Fast delivery fast and high quality delivery of Spain buying in TECNOIOT. Resolution max. Sensitivity: 570nm; wide sensitivity angle: +/- 60degree; Adapted to human eye responsivity.
SparkFun - Low stand by current consumption: typically 05uA. Configurable i2C address Default: 0x48. Removable pull-up resistors and power LED. Easy to use thanks to the Qwiic system, no soldering is required to connect it to the rest of your system. Arduino library that gives full access to all features and includes example code demonstrating all its abilities available.
Waveshare - Onboard tsl25911fn light-to-digital converter, with embedded ADC, provides a value that approximates the human eye response to assist the module.
ASHATA - To use this module, you need to solder the supplied 5-pin connector according to the purpose. According to the type of microcontroller used, this module needs to install for CircuitPython library. The sensor is designed for use with for Raspberry Pi type microcontrollers, or compatible via I2C bus. Light measuring sensor board have stable structure, excellent performance and long service life. This is a veml7700 sensor-based module for measuring ambient light, very practical.
Annadue - To use this module, you need to solder the supplied 5-pin connector according to the purpose. Light measuring sensor board have stable structure, excellent performance and long service life. This is a veml7700 sensor-based module for measuring ambient light, very practical. According to the type of microcontroller used, this module needs to install for CircuitPython library. The sensor is designed for use with for Raspberry Pi type microcontrollers, or compatible via I2C bus.
Waveshare - Provides interrupt output with programmable upper and lower thresholds. High sensitivity up to 188uLux, wide dynamic range up to 600M:1. Embedded infrared-responding photodiode, allows precise measuring even on strong infrared noise environment. Embedded adc, direct light intensity signal output to I2C interface, less noise jamming. Adopts tsl25911fn, measures infrared plus visible light wider range than TSL2561. Onboard voltage translator, compatible with 3. 3v/5v operating voltage.
BooiParts - Veml7700 ambient light sensor module 120k lux light measuring Sensor Board 3. 3v 5v i2c iic interface for Arduino Raspberry Pi.
