As an Amazon Associate I earn from qualifying purchases.
CUTICATE 6" Dual Ball Joint Extension Arm Clamp Mount F/Scuba Dive Underwater CameraCUTICATE
- Lightweight aluminum alloy processing ball head socket to meet the highly accurate and durable requirements. 2pcs scuba diving arm clip clamp mount with 6 inch dual ball joint arm connector.
Wide range of strong practicality, is photography enthusiasts a great choice. Can rotate 360 degrees, and can rotate about 80 degrees in the horizontal direction; have a higher degree of freedom to adjust the direction of the flash.
Adjustable spinning handle design, can connect multiple diving devices; naturally suitable for fingers and made of resin to enhance its operability, easy to loose, with lower power consumption, adjust the relative angle of the joint arms firmly clamp the ball joints.
Digicharge Flexible Gooseneck Clamp Arm Jaws Mount Compatible for GoPro Hero11 Hero10 Max Hero9 Hero 11 Mini 10 9 8 7 6 Hero8 Akaso Apexcam Dragon Touch Vemont Action Camera Cam 72cm 28’’ LongDigicharge
- The jaws of the clamp mount feature soft cushion pads that help the jaws grip on to surfaces, while also protecting those surfaces under pressure from the clamp. The gooseneck pipe is extremely strong, but still incredibly flexible. This genuine digicharge 72cm adjustable gooseneck allows to get the perfect position to take photos or videos.
You can twist and bend it any way you like and be confident that it will remain in position. The ball and socket mount allows you to move your camera through 360 degrees rotation and provides 45 degrees tilt.
Further up the clamp there is woven fabric to ensure any surface you clamp to is protected from scratches. Digicharge compatible with action cameras gopro hero11, gopro max, gopro hero11 mini gopro hero10, gopro hero9 9 hero8 8 hero7 7 hero6 6 4k hero5 hero 4 session mini hero 11 11 mini 10 9 8 7 6 5 4 3+ 3 2 1 akaso brave 4 v50 ek7000 ek5000 apexcam Dragon Touch Campark Crosstour Jeemak DBPOWER Vemont Tec.
Bean Geekam i. E. Geek garmin virb 360 virb x xe ultra 30 apeman waterproof camkong vtech kidizoom Kitvision Pixpro Rocoh Theta Motorola Vervelife Sony Loads SJCAM Xiaomi YI Yi 4K. The clamp opens to 7cm wide for easy installation.
|Manufacturer||Digital Accessories Ltd|
|Height||10 cm (3.94 Inches)|
|Length||17 cm (6.69 Inches)|
|Weight||0.41 kg (0.9 Pounds)|
|Width||15 cm (5.91 Inches)|
Sharprepublic 4X Bike Flashlight Holder Light Torch Clip Clamps Arm Mount Bracketsharprepublic
- Made of high quality rubber and metal screws, lightweight and durable. Included 4 pieces flashlight. Suitable for all kinds of diving flashlight, torch.
The clamp can be attached to tripod for fixing Tripod at bike handles or single arm position. Good helper for night riding, climbing, hiking, camping, caving, running and more outdoor activities.
SHOOT Jaws Flex Clamp Mount + 8 joint Adjustable Gooseneck Arm Mount for Gopro Hero10/9/ 8/Hero 7/Hero 6/Hero 5/4/3+/3/2/1 SJCAM SJ4000/SJ5000/SJ6000 Camera and Other Action CameraSHOOT
- Compatibile with gopro hero session gopro hero 10/9/7/6/5/4/3+/3/2 sjcam sj4000 SJ5000 SJ6000 and other action cameras, a perfect match to stabilizer your camera and free your hands. Neck length: approx.
Clamp your gopro on anything in size from 025" to 2" 06cm to 5cm in diameter. 24cm, 9. 5 inch. Optional flex gooseneck adjusts to enable a variety of shooting angles for your gopro camera. Content:1x flex clamp + 1x Adjustable goose neckKindly note:camera, housing are NOT included.
|Height||3 cm (1.18 Inches)|
|Length||33 cm (12.99 Inches)|
|Width||12.7 cm (5 Inches)|
Pilipane Camera Clamp Mount Monitor Ballhead Magic Arm Double Ball Head, Aluminium Alloy Bicycle Odemeter Computer Extension Mount Adapter Camera Holder Mount for GoproBlackPilipane
- Suitable for 25. 4 or 31. 8mm handlebar. Through rotate the ball head, Multi-angle rotation, make the device in right direction, easy adjustment for optimal viewing. It could be attached and detached from the monitor quickly and the position of the monitor is adjustable as per your needs during shooting.
Suitable for many brands and models of bike computer, with a adapter mount for Gopro. Firmly fixing on the handlebar, not prone to slide. Made of good quality materials, durable and lightweight.
|Height||2.8 cm (1.1 Inches)|
|Length||12.5 cm (4.92 Inches)|
|Weight||0.07 kg (0.15 Pounds)|
|Width||3.6 cm (1.42 Inches)|
XT-XINTE Aluminum CNC Camera Accessory Diving Ball Fixture Lights Arm Ball Butterfly Clip Triple Clamp Mount Adapter for Sport Camera BlackXT-XINTE
- Size: 55mm*55mm*62mmL*W*H. All-aluminum alloy hard thickened oxidized surface treatment, more scratch resistant; 304 stainless steel screw spring; wide and large handle, more convenient and easy to rotate, does not hurt the hand.
Made of aluminum alloy hollow. The three-hole butterfly clip design breaks through the traditional style and enhances the use limit of the butterfly clip. The diving clamp mount for diameter 25mm ball compatible with arm brands like ULCS, INON, Ikelite, SEA&SEA. Material: durable air-grade aluminum.
|Weight||0.06 kg (0.14 Pounds)|
OsoPro Camera Mount Clamp Motorcycle Bike Handlebar Clamp Holder Mounts for GoPro with Ballhead Arm Stand Camera Mount 360 RotationOsoPro
- 360 degree ball head rotation -- the webcam stand camera mount ball head adopts a 360-degree freely rotatable dual-ball adapter, supports 360-degree rotation with the camera mounts ball head as the axis, an additional 180-degree adjustable and attached sports camera accessories support adjust the angle back and forth.
It is easy to operate and free to take and release. This camera monitor mount is compatible with any camcorder with a 1/4" screw mount adapter, apeman, crosstour, DSLR, VanTop, flashes, Camppark, LED video lights, microphones, monitors, Canon, such as GoPro Hero 9 Max 8 7 6 Black 5 4, which can help you install small cameras, SJCAM and other brand models.
The camera clamp holder mounts is made of aluminum alloy, aluminum alloy, ensuring that your camera will not fall during strenuous exercise outdoors.
Standard 1/4'' thread -- our double ball head design gopro mount has a 1/4''diameter screw at the top, dragon touch, aka0, nikon, sony, etc. After-sales service -- our motorcycle riding vlog shooting camera mounts & clamps is durable use. The diameter of the round pipe ranges from 07-1. 3 inches. There are two rubber anti-skid pads in the vigorous clamp at the bottom of the stand camera mount, and stainless steel.
Tbest Diving Lights Butterfly Clip Arm Clamp Mount Ball Joint Connector Aluminum Ball Clamp Mount Clip Adapter replacement for CameraTbest
- Portable and lightweight, compatible with various brands of cameras. 360¡ã rotation design, ball clamp offers flexible angle adjustment, 80¡ã rotatable in horizontal direction. Ball clamps are made of quality aluminium alloy, anti-rust, sturdy, durable replacement for long time use without dereplacement formation.
Portable and lightweight, compatible with various brands of cameras.
Portable and lightweight, compatible with various brands of cameras. Portable and lightweight, compatible with various brands of cameras. Portable and lightweight, compatible with various brands of cameras.
Ball clamp mount is easy to use, and can be assembled with other accessories replacement for various uses. Portable and lightweight, compatible with various brands of cameras. Ball clamps are useful tool replacement for easily attaching ball connector to diving flashlight, the screw can lock the clamp replacement for firm fixation.
|Height||1 cm (0.39 Inches)|
|Length||1 cm (0.39 Inches)|
|Weight||0.06 kg (0.13 Pounds)|
|Width||1 cm (0.39 Inches)|
SOONSUN Thumb Screw Bolt Kit Replacement with WiFi Remote Clamp Mount Holder and Wrist Strap for GoPro 3-Way Grip Arm TripodSOONSUN
- It comes with clamp mount holder. This thumb screw bolts is the replacement for your GoPro 3-way grip arm tripod. With it, you can mount your WiFi remote on your GoPro 3-way grip firmly for one-handed operation.
Package include: thumb screw for gopro 3-way grip x 2; long screw x 1; Short screw x 2; Clamp mount holder x 1; Wrist strap x 1. Please note: the grip arm tripod and WiFi remote are NOT included.
There is an adjustable button on the strap which allows you adjust the strap length. It provides good protection for your GoPro 3-way grip arm tripod. The wrist strap is made of high quality cloth. The package also includes 1 long screw and 2 short screws, you can use them to mount your GoPro camera on the tripod. It will repair your GoPro 3-way tripod if your thumb screw was lost or broken.
|Height||8.89 cm (3.5 Inches)|
|Length||19.05 cm (7.5 Inches)|
|Weight||0.02 kg (0.04 Pounds)|
|Width||22.86 cm (9 Inches)|
Harilla 4X Holder Clip Clamps Arm Mount Bracket Tripod Clamp Parts BlackHarilla
- Included 4 pieces flashlight. Suitable for all kinds of diving flashlight, torch. Made of high quality rubber and metal screws, lightweight and durable.
The clamp can be attached to tripod for fixing Tripod at bike handles or single arm position. Good helper for night riding, climbing, camping, caving, hiking, running and more outdoor activities.