As an Amazon Associate I earn from qualifying purchases.1. ionz
IONZ KZ-X Deep Space ATX Full Tower PC Case with support for up to 12 Fans and Tempered Glass on 3 Sides. 4 ARGB FANS Included
ionz - 240/280/360 front, top, 240/280 top and 120 Rear. Supports 2 x optional additional LED Lighting Strips for maximum impact. All around tempered glass. The kz-x deep space is the largest case ionz has ever sold.
Watercooling support as standard, rear or front mounting options available. With support for upto 12 Fans this will make your Build stand out in any situation. Support for 2 x 3.
5" hdds and 3 x 2. 5" hdds and a max gpu size of 400mm max cpu cooler of 170mm. Comes with a aura sync compatible A-RGB Controller for maximum control of your lighting setup. With rubber grommets to Aid the flow of cables throughout the case. Support for a bottom mounted psu the chassis stands at 450mm x 210mm x 530mm. Pci slots and support for either ATX/MATX or ITX. A true beast.
| Brand | ionz |
| Manufacturer | ionz |
| Part Number | KZ-X |
| Model | KZ-X |
| Warranty | 12 Months |
2. ionz
Ionz KZ12 PC TOWER CASE FULL ATX GAMING TEMPERED GLASS SIDE WITH MESH FRONT…+ 3 FRGB
ionz - The internal components make it quick and easy to build a beautiful PC with easy cable management and routing options for elegant clean construction. The top includes a removable dust filter that prevents dust from entering your PC and helps maximize overall performance.
Case: 465 x 215x 493MM. Kaza kz12 is a full size atx pc gaming Case with a full Mesh front for maximum airflow making your system smooth through those intensive gaming sessions.
Size: chassis: 360 x 210 x 465mm. The left side comes with a removable tempered glass panel allowing the user to easily show off their build amd to make changes to the perfect setup. Includes 3 x rgb halo fans fixed colour, colour will not change. Supports 8 x 120mm fans. Fans not installed.
| Brand | ionz |
| Manufacturer | IONZ |
| Weight | 5.3 |
| Part Number | KZ12FRGB |
3. ionz
IONZ GAMER EDITION KESSHO TOWER PC ATX CASE TEMPERED GLASS SIDE WITH 4 INCLUDED ARGB FANS
ionz - Case size: 415 x 215x 482mm. A stunning crystal inspired front panel with a bold geometric design. Top mesh dust cover and integrated top panel connectors further enhance the elegant and and sleek design.
3 x 12cm argb fans are included in the front and a rear ARGB Fan for ample airflow and cooling, for those wanting a little more the case can fit another 4 fans 12cm. Looking to show off your expensive components and clean build? The LHS panel is Tempered Glass, so that everyone can see what you are packing.
With enough airflow and cooling from the installed ARGB Fans to ensure maximum performance. A generous cable management depth of 28mm and integrated cabling access ports means that you'll never be short on options when building your dream system.
4. Cooler Master
Cooler Master MasterBox TD500 Mesh, ARGB PC Case with Tessellated Mesh, Flexible Air Flow Configurations, CrystallineGlass Side Panel, 3 x 120mm Pre-Installed Fans
Cooler Master - Edge-to-edge crystalline tempered glass side panel - Showcase your build and system lighting effects through the 4mm-thick tempered glass side panel - precision-engineered for strength as well as aesthetics. Main components clearance - supports cpu coolers air/liquid up to a height of 165mm, graphic cards GFX up to a length of 410mm and power supplies PSU up to a length of 180mm.
Mini-itx, e-atx* *up to 12" x 107". Maximize the possibilities - spacious interior layout accommodates standard form factor ATX motherboards for gaming needs, Standard ATX, Micro-ATX, SSI CEB, e.
G. 3 x 120mm argb fans - the pre-installed fan lighting can be assigned via an onboard controller or directly connected to ARGB supported motherboards ASUS, Gigabyte, MSI and ASRock.
Versatile fan and radiator support - support for up to seven 120mm fans and dual 360mm radiators on the top and front panel ensure that even the most extreme systems stay cool. The front panel features full tessellated mesh for optimal inward airflow, while the top panel comprises of a fine mesh for maximum exhaust volume.
| Brand | Cooler Master |
| Manufacturer | Cooler Master Europe B.V. |
| Height | 57 cm (22.44 Inches) |
| Length | 57.2 cm (22.52 Inches) |
| Weight | 6.95 kg (15.32 Pounds) |
| Width | 29 cm (11.42 Inches) |
| Part Number | MCB-D500D-KGNN-S01 |
| Model | MCB-D500D-KGNN-S01 |
| Warranty | 2 year manufacturer |
5. Cooler Master
PC Case with Dual 200mm Fans for High-Volume Airflow, Flexible ATX Hardware Capacity, Mesh and Transparent Front Chassis Panels, Cooler Master MasterCase H500 ARGB
Cooler Master - Dual 200mm argb fans - two massive 200mm mf200r rgb fans draw high-volume airflow into the case for superior cooling includes an additional black 120mm fan at the back - fully compatible with RGB-certified motherboards ASUS Aura, Gigabyte Fusion, MSI Mystic Light, and ASRock for comprehensive ARGB lighting.
Interchangable front panels - Includes a fine mesh front panel for optimised airflow and a sleek transparent panel for crystal clear aesthetics. Tempered glass side panel - the easy-to-remove grey-tinted side panel combined with minimalist front cable and PSU covers, PSU 180mm, and Mini-ITX motherboards with extra clearance for the CPU cooler 167mm, Micro-ATX, creates a clean frame in which to showcase the hardware inside.
Supports atx, and GFX card 410mm. Magnetic filter panel - wide-area air filter on top provides additional thermal exhaust capacity supports extra fans and/or water radiators, while the front end of the panel houses a concealed handle for transportation up to 20kg. Accessible i/o panel - features a manual argb controller, 2 x usb 2. 0 ports, 2 x USB 3. 2 gen 1 formerly USB 3. 0 ports, 1 x 3. 5mm audio jack and 1 x 3.
| Brand | Cooler Master |
| Manufacturer | Cooler Master Europe B.V. |
| Height | 50.2 cm (19.76 Inches) |
| Length | 52.5 cm (20.67 Inches) |
| Weight | 9.22 kg (20.33 Pounds) |
| Width | 22.8 cm (8.98 Inches) |
| Part Number | MCM-H500-IGNN-S01 |
| Model | MCM-H500-IGNN-S01 |
| Warranty | 2 years |
6. ionz
IONZ KZ07 PC BLACK COMPUTER MID TOWER CASE ATX M/ATX GAMING USB 3 INCLUDES 1 X FRGB FAN
ionz - Clean and modern front panel Featuring a high-speed USB 3 0 port and additional ports for all connections. Space for 5 x 120mm cooling fans. Case size : 460 x 185 x 420mm. Minimalist arctic black exterior design with acrylic side panel allows a full view of your computers components.
As comfortable in a Modern office as it is in a Gaming Room. The internals make it quick and easy to build a stunning PC with easy cable management and routing options for an elegant clean build. 1 x frbg fan included not fitted. Modern and stylish clear acrylic panel design.
| Brand | ionz |
| Manufacturer | IONZ |
| Height | 42 cm (16.54 Inches) |
| Length | 46 cm (18.11 Inches) |
| Weight | 4.5 |
| Width | 18.5 cm (7.28 Inches) |
| Part Number | KZ071RGB |
7. GameMax
1 x 120mm ARGB Rear Fan Included, ATX, 5 Fan Support, GameMax Black Hole ARGB Mid-Tower PC Gaming Case, 2 x 200mm ARGB Fans Included, Water-Cooling Ready | Black, ARGB Hub, 3 Pin AURA Sync
GameMax - The black hole is a brilliantly designed mid-tower pc gaming case and the first gameMax chassis to include two 200mm ARGB fans not only will these look great in your gaming set up but enable exceptional airflow. Included in the black hole is an argb v2. 0 argb pwm hub, also 2 rgb buttons mode & brightness, have access to 18 colour modes manually or have even more using the motherboard software.
Excellent cooling options are on offer with two 200mm fans at the front are not only more efficient but a lot quiter compared to mounting 120mm fans, mount a total of eight fans and room to mount water cooling radiators on the front Up to 360mm, top Up to 280mm and rear Up to 120mm your case will have no problem cooling those high end components.
You can now take your colour control to new levels with the included ARGB motherboard connection on the PWM hub, simply connect the 3pin AURA from your motherboard and you can use the mobo software to sync your fans and strips the way you like.
Once all connected enjoy pwm auto speed controlled via mb’s pwm signal, connect up to five fans and two LED strips, it much better for user to easy adjust light mode and adjust between 5 different brightness modes 0-20-40-80-100%. A 3mm full left side tempered glass panel to show off your build from all angles. Fit an atx motherboard and with plenty of room you can fit a wide selection of top hardware, meeting most installation requirements. Gpu bracket - the chassis includes a bracket designed for support to the graphics card, prevents sag and the bracket allows for the installation of larger graphic cards.
| Brand | GameMax |
| Manufacturer | A One Distribution (UK) Ltd |
| Height | 46.6 cm (18.35 Inches) |
| Length | 41.4 cm (16.3 Inches) |
| Weight | 6.45 kg (14.22 Pounds) |
| Width | 21.5 cm (8.46 Inches) |
| Part Number | GMX-BLACKHOLE |
| Model | GMX-ARGB HOLE |
| Warranty | 12 Months Warranty |
8. GameMax
ATX, 3 x 120mm Halo Dual Ring Rainbow RGB Fans Included, GameMax Starlight Mid-Tower RGB PC Gaming Case, Full Tempered Glass Side Window, Black
GameMax - Please note only one fan is pre-installed and two are for you to fit. Pwm hub ir remote controller - the starlight comes with a pwm hub and can connect to 9 devices in total, 6-pin fans. Water-cooling support - the starlight can fit 1 x 120 / 240mm radiator at the front, 1 x 120 / 240mm radiator at the top and 1 x 120 / 140 / 140 / 140mm radiator at the back to give the user extensive water cooling support.
Led button - the led button on the i/o panel allows for easy access when changing the colour of the Rainbow RGB fans. The hub comes with a 3-pin aura connector and IR remote controller giving you unlimited control over your LED lighting.
Fans - supports up to five fans with 3 x 120mm single-ring Halo Rainbow RGB fans included to give your chassis some added colour. Design - the starlight is a mid-tower gaming case with a unique design it comes with cut outs on the right-hand side to provide good airflow, a full tempered glass left side panel and a Rainbow RGB strip on the front.
| Brand | GameMax |
| Manufacturer | A One Distribution (UK) Ltd |
| Height | 47.7 cm (18.78 Inches) |
| Length | 45 cm (17.72 Inches) |
| Weight | 4.5 kg (9.92 Pounds) |
| Width | 21.1 cm (8.31 Inches) |
| Part Number | GMX-STARLIGHT3 |
| Model | GMX-STARLIGHT3 |
| Warranty | 12 Months |
9. Corsair
Flexible Storage Options, Removable Dust Filters, Corsair 110Q Quiet Mid-Tower ATX Case Minimalist Design, 120 mm Fan Included, Black
Corsair - Removable dust filters in the floor and front help keep your system clean long after the build is finished. The 110q’s minimalist design ensures that your system can fit in almost any environment, with four high-density sound dampening panels to reduce noise.
Includes a 120mm fan to cool your components out-of-the-box. Supports up to four drives for the storage options you need: two 2. 5in trays and two combo 3. 5in/ 2. 5in trays in a removable cage, Plus a 5. 25in odD bay. Fits up to 4x 120mm or 2x 140mm cooling fans or multiple radiators to keep your PC cool.
| Brand | Corsair |
| Manufacturer | CORSAIR HOLDINGS HONG KONG LTD |
| Height | 48.4 cm (19.06 Inches) |
| Length | 53.3 cm (20.98 Inches) |
| Weight | 6 kg (13.23 Pounds) |
| Width | 27.3 cm (10.75 Inches) |
| Part Number | CC-9011184-WW |
| Model | CC-9011184-WW |
| Warranty | maker |
10. Unknown
420 mm Radiator Support and Aura Sync, Black, ASUS ROG Strix Helios RGB ATX/EATX Mid, GPU Braces, Tower Gaming Case with Tempered Glass, Aluminium Frame
Unknown - Versatile gpu mounting: install three graphics cards in standard orientation or two vertically for extra showcase flair using a bundled bracket. Advanced i/o panel: usb 3.
1 generation 2 type-c port, four USB 3. 0 ports, an rgb-lighting control button and a fan-speed control button. Comfortable case handles: Easily carry your prized build to LAN parties with ergonomic and stylish fabric handles. Ready for serious cooling: supports an up to EATX motherboard with room for 420 mm front radiators and water-cooling pump and reservoir.
Premium design and aesthetics: Made for showcase builds with three tempered-glass panels, brushed-aluminium frame and integrated aura sync RGB front lighting. Clean build made easy: a multifunction cover with graphics card holders, a PSU shroud and a translucent rear cable cover offer effortless cable management.
| Brand | Unknown |
| Manufacturer | Asus |
| Height | 59 cm (23.23 Inches) |
| Length | 56 cm (22.05 Inches) |
| Weight | 18 kg (39.68 Pounds) |
| Width | 25 cm (9.84 Inches) |
| Part Number | 90DC0020-B39000 |
| Model | 90DC0020-B39000 |
| Warranty | 2 year manufacturer |
ionz - 240/280/360 front, top, 240/280 top and 120 Rear. Supports 2 x optional additional LED Lighting Strips for maximum impact. All around tempered glass. The kz-x deep space is the largest case ionz has ever sold.
ionz - The internal components make it quick and easy to build a beautiful PC with easy cable management and routing options for elegant clean construction. The top includes a removable dust filter that prevents dust from entering your PC and helps maximize overall performance.
ionz - Case size: 415 x 215x 482mm. A stunning crystal inspired front panel with a bold geometric design. Top mesh dust cover and integrated top panel connectors further enhance the elegant and and sleek design.
Cooler Master - Edge-to-edge crystalline tempered glass side panel - Showcase your build and system lighting effects through the 4mm-thick tempered glass side panel - precision-engineered for strength as well as aesthetics. Main components clearance - supports cpu coolers air/liquid up to a height of 165mm, graphic cards GFX up to a length of 410mm and power supplies PSU up to a length of 180mm.
Cooler Master - Dual 200mm argb fans - two massive 200mm mf200r rgb fans draw high-volume airflow into the case for superior cooling includes an additional black 120mm fan at the back - fully compatible with RGB-certified motherboards ASUS Aura, Gigabyte Fusion, MSI Mystic Light, and ASRock for comprehensive ARGB lighting.
ionz - Clean and modern front panel Featuring a high-speed USB 3 0 port and additional ports for all connections. Space for 5 x 120mm cooling fans. Case size : 460 x 185 x 420mm. Minimalist arctic black exterior design with acrylic side panel allows a full view of your computers components. As comfortable in a Modern office as it is in a Gaming Room. The internals make it quick and easy to build a stunning PC with easy cable management and routing options for an elegant clean build. 1 x frbg fan included not fitted. Modern and stylish clear acrylic panel design.
GameMax - The black hole is a brilliantly designed mid-tower pc gaming case and the first gameMax chassis to include two 200mm ARGB fans not only will these look great in your gaming set up but enable exceptional airflow. Included in the black hole is an argb v2. 0 argb pwm hub, also 2 rgb buttons mode & brightness, have access to 18 colour modes manually or have even more using the motherboard software.
GameMax - Please note only one fan is pre-installed and two are for you to fit. Pwm hub ir remote controller - the starlight comes with a pwm hub and can connect to 9 devices in total, 6-pin fans. Water-cooling support - the starlight can fit 1 x 120 / 240mm radiator at the front, 1 x 120 / 240mm radiator at the top and 1 x 120 / 140 / 140 / 140mm radiator at the back to give the user extensive water cooling support.
Corsair - Removable dust filters in the floor and front help keep your system clean long after the build is finished. The 110q’s minimalist design ensures that your system can fit in almost any environment, with four high-density sound dampening panels to reduce noise. Includes a 120mm fan to cool your components out-of-the-box. Supports up to four drives for the storage options you need: two 2. 5in trays and two combo 3. 5in/ 2. 5in trays in a removable cage, Plus a 5. 25in odD bay. Fits up to 4x 120mm or 2x 140mm cooling fans or multiple radiators to keep your PC cool.
Unknown - Versatile gpu mounting: install three graphics cards in standard orientation or two vertically for extra showcase flair using a bundled bracket. Advanced i/o panel: usb 3.
